Jump to content

Recommended Posts

B) I installed SourceBoost IDE first before installing the MPLAB IDE v8.0 a few days later.

 

Following instructions in Boostc manual I did the following:

 

1. copied files from C:\Program Files\SourceBoost\mplab on my computer, HP running XP, into c:\Program Files\MICROCHIP\MPLAB IDE\Core\MTC Suites.

 

2. Note: MTC Suites directory was found in the Core directory. New location under MPLAM IDE v8.0?

 

3. Opened Projects > Set Tool Locations menu and could not find sourcrBoost.

 

Please advise on corrective action.

 

All the best,

 

Eric RO

Link to post
Share on other sites

Eric_RO,

B) I installed SourceBoost IDE first before installing the MPLAB IDE v8.0 a few days later.

 

Following instructions in Boostc manual I did the following:

 

1. copied files from C:\Program Files\SourceBoost\mplab on my computer, HP running XP, into c:\Program Files\MICROCHIP\MPLAB IDE\Core\MTC Suites.

 

2. Note: MTC Suites directory was found in the Core directory. New location under MPLAM IDE v8.0?

 

3. Opened Projects > Set Tool Locations menu and could not find sourcrBoost.

 

Please advise on corrective action.

 

All the best,

 

Eric RO

Re-install the SourceBoost software package. During the installation make sure you press the integrate into MPLABs button.

 

Regards

Dave

Link to post
Share on other sites

:)

 

Dave,

 

 

Eric_RO,
<_< I installed SourceBoost IDE first before installing the MPLAB IDE v8.0 a few days later.

 

Following instructions in Boostc manual I did the following:

 

1. copied files from C:\Program Files\SourceBoost\mplab on my computer, HP running XP, into c:\Program Files\MICROCHIP\MPLAB IDE\Core\MTC Suites.

 

2. Note: MTC Suites directory was found in the Core directory. New location under MPLAM IDE v8.0?

 

3. Opened Projects > Set Tool Locations menu and could not find sourcrBoost.

 

Please advise on corrective action.

 

All the best,

 

Eric RO

Re-install the SourceBoost software package. During the installation make sure you press the integrate into MPLABs button.

 

Regards

Dave

 

 

Reinstalled per your instructions and it works now.

 

Thanks for your response.

 

 

All the best,

 

Eric RO

Link to post
Share on other sites
  • 2 years later...

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...