Jump to content

Adc Clock Is Freezing My Program!

Recommended Posts

This is a strange problem - I have an ADC interrupt that works fine when using Frc, the dedicated ADC oscillator, as long as internal oscillator frequency operates at 2, 4, or 8MHz. Below 2MHz, the program freezes, but only when using Frc. The other ADC clock sources work fine.


Anyone have any ideas? Thanks!

Link to post
Share on other sites

Info is thin on the ground for this one.


From what I read, the FRC is not recommended on low device clock rates due to digital switching noise unless the device is put to sleep during conversion.


I would have thought this noise would only effect the accuracy and not freeze the device.


How do you read note 4 in the data sheet ?





Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...