Jump to content
Sign in to follow this  
tmd_63

Flowcode and BoostC

Recommended Posts

I use your BoostC from within Flowcode and I am happy with the way this operates. But I would also like to use the BoostC outside of this environment.

I read that there is a free IDE environment but I don't know how to get it or how to integrate it with the full BoostC compiler.

Can you help with this please.

Share this post


Link to post
Share on other sites

tmd_63,

 

I use your BoostC from within Flowcode and I am happy with the way this operates. But I would also like to use the BoostC outside of this environment.

I read that there is a free IDE environment but I don't know how to get it or how to integrate it with the full BoostC compiler.

Can you help with this please.

When you purchase Flowcode you get a BoostC compiler license that can only be used from within the Flowcode environment. If you want to use standalone BoostC compiler then you can either use the free lience version, or buy the desired license.

License details can be found here:

http://www.sourceboost.com/Products/BoostC...imitations.html

 

Regards

Dave

Share this post


Link to post
Share on other sites

Thank you Dave for your reply.

The main reason for the query is that I am trying to use Flowcode, but some of the macro substitutions are limited. I need to find out how they work and how to use them to create a new component code.

Specifically, there is a component which uses macro substitutions of %a to %u but it uses only 4 data lines and 2 command lines. The device has the capability to use 8 data lines and 3 command lines and for speed, I need to use all these lines which would require macro substitutions of %aa to %at at least. Each macro sub is used to reference registers, datalines, data line IO definitions etc. However, just replacing the macro sub as %aa does not give the desired effect, as follows.

If %a = PortA and %b = PortB in the original code gives PortA and PortB in the original subtituted code.

Changing the macro subs to %aa = PortA and %ab = PortB gives PortAa and PortAb in the substituted code instead of PortA and PortB

Share this post


Link to post
Share on other sites
If %a = PortA and %b = PortB in the original code gives PortA and PortB in the original subtituted code.

Changing the macro subs to %aa = PortA and %ab = PortB gives PortAa and PortAb in the substituted code instead of PortA and PortB

I think what you are talking about is some of the Flowcode functionality. It looks like from what you are saying that the macro substitution only works with with the first character after the %, any more characters are consider part of the text that will be kept. I don't really know Flowcode so this is a guess from what you say. Sounds like a question for the Matrix Multimedia Flowcode forum.

 

Regards

Dave

Share this post


Link to post
Share on other sites

Your content will need to be approved by a moderator

Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoticons maximum are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×