Jump to content
Sign in to follow this  
bhPIC

Problems Programming A Boostc Hex, But Not C2c Hex

Recommended Posts

I am having difficulty programming (writing the hex file to the pic) when I build with boostc, but if i change the toolsuite to c2c-plus and then build it programs fine. I am using a dev board for a 16f877 from ett and the ett software to program. When I call up a hex file that was created via c2c it programs fine (my programming indicator bar and the led on the board show progress) but when I try with the boostc hex, the led lights up and shows progress but the programming software doesn't and it never finishes (the led blinks forever).

 

If I build one of the sample projects for boostc it does the same thing.

 

Any Ideas?

Share this post


Link to post
Share on other sites

bhPIC,

 

I suspect that this is you problem:

 

http://sourceboost.ipbhost.com/index.php?s...findpost&p=4059

 

So if you delete the first line in the .hex file then it will probably work ok with your programmer.

 

This will be fixed in the next release :)

 

Regards

Dave

Share this post


Link to post
Share on other sites

Sure enough, I found that post after I had made mine, sorry. Deleting the first line works and my programmer goes through alright. It still kinda hangs at the end for a bit but it eventually finishes and things work.

 

Thanks

Share this post


Link to post
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...