Eric_RO 0 Posted December 20, 2007 Report Share Posted December 20, 2007 I installed SourceBoost IDE first before installing the MPLAB IDE v8.0 a few days later. Following instructions in Boostc manual I did the following: 1. copied files from C:\Program Files\SourceBoost\mplab on my computer, HP running XP, into c:\Program Files\MICROCHIP\MPLAB IDE\Core\MTC Suites. 2. Note: MTC Suites directory was found in the Core directory. New location under MPLAM IDE v8.0? 3. Opened Projects > Set Tool Locations menu and could not find sourcrBoost. Please advise on corrective action. All the best, Eric RO Quote Link to post Share on other sites
Dave 0 Posted December 24, 2007 Report Share Posted December 24, 2007 Eric_RO, I installed SourceBoost IDE first before installing the MPLAB IDE v8.0 a few days later. Following instructions in Boostc manual I did the following: 1. copied files from C:\Program Files\SourceBoost\mplab on my computer, HP running XP, into c:\Program Files\MICROCHIP\MPLAB IDE\Core\MTC Suites. 2. Note: MTC Suites directory was found in the Core directory. New location under MPLAM IDE v8.0? 3. Opened Projects > Set Tool Locations menu and could not find sourcrBoost. Please advise on corrective action. All the best, Eric RO Re-install the SourceBoost software package. During the installation make sure you press the integrate into MPLABs button. Regards Dave Quote Link to post Share on other sites
Eric_RO 0 Posted December 26, 2007 Author Report Share Posted December 26, 2007 Dave, Eric_RO, I installed SourceBoost IDE first before installing the MPLAB IDE v8.0 a few days later. Following instructions in Boostc manual I did the following: 1. copied files from C:\Program Files\SourceBoost\mplab on my computer, HP running XP, into c:\Program Files\MICROCHIP\MPLAB IDE\Core\MTC Suites. 2. Note: MTC Suites directory was found in the Core directory. New location under MPLAM IDE v8.0? 3. Opened Projects > Set Tool Locations menu and could not find sourcrBoost. Please advise on corrective action. All the best, Eric RO Re-install the SourceBoost software package. During the installation make sure you press the integrate into MPLABs button. Regards Dave Reinstalled per your instructions and it works now. Thanks for your response. All the best, Eric RO Quote Link to post Share on other sites
Allegro 0 Posted April 16, 2010 Report Share Posted April 16, 2010 yes working also with MPLAB 8.46 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.